Clamar Floats Specification Sheets

Model 2200 Float Specs.Model 2500 Float Specs.Model 3500 Amphibious Float Specs.Model 2180 Float Specs.Model 2750 Specs.

Model 2200 Float Specifications:
Length:		16 ft. 4 in.
Width:		Tail 20″ Mid 29″ Nose 19.5″
Height:		23.5″ Highest point
Compartments:		6 All accessible with 6″ spin off covers or baggage doors
Main baggage compartment:		11″ X 21.75″ opening (17 CUBIC FEET ON C OF G)
Wheels:		Amphib. Mains 500 by 5 with 15″ tires, chromed bearings, and modified grease fittings for extended wear. 600 X 6 on request.
Azusalite Nose:		4.00 By 5 Full 10 Inch Wheel 4.5 inches wide
Colors:		Delivered in epoxy primer final paint on request. Trim black (Covers and cleats) No skid abrasive coating full length including people step.
Sample Calculations for P-18 Replica (Wide Body)
	Amphibious floats (Includes Rigging)	Straight Floats (Includes Rigging)
EMPTY WEIGHT	1150	1150
MAIN GEAR	-79	-79
TAIL WHEEL	-13	-13
AMPHIB FLOATS Includes Rigging	405	242
GROSS WEIGHT	2200	2200
USEFUL LOAD	717	860
EXCHANGE WEIGHT	313	150

Model 2500 Float Specifications:
Length:		16 ft. 4 in.
Width:		Tail 20″ Mid 30″ Nose 19.5″
Height:		25.5″ Highest point
Compartments:		6 All accessible with 6″ spin off covers or baggage doors
Main baggage compartment:		11″ X 21.75″ opening (18 CUBIC FEET ON C OF G)
Wheels:		Amphib. Mains 600 x 6 with 15″ tires, chromed bearings, and modified grease fittings for extended wear.
Azusalite Nose:		4.00 By 5 Full 10 Inch Wheel 4.5 inches wide
Colors:		Delivered in epoxy primer final paint on request. Trim black (Covers and cleats) No skid abrasive coating full length including people step.
Sample Calculations Sportsman 2+2
	Amphibious	Straight
GROSS WEIGHT	2500	2500
EMPTY WEIGHT	1400	1400
USEFUL LOAD	1100	1100
AMPHIB FLOATS Includes all Rigging	400	280
MAIN GEAR	-100	-100
TAIL WHEEL	–13	–13
EXCHANGE WEIGHT	287	167
USEFULL LOAD WITH FLOATS	813	933

Model 3500 Amphibious Float Specifications:
Length:	20 ft. 3 7/8th in.
Width:	Tail 22″ Mid 33″ Nose 9″
Height:	29″ Highest point float only with gear down 20″
Draw Depth:	20″
Compartments:	6
Main baggage compartment:	11″ X 21.75″ opening (25 CUBIC FEET ON CG)
Wheels:	Main: 600 x 6 with 17.5″ tires 8 ply Grove amphibious wheels and brakes Modified axle grease fittings for extended wear Nose: 400 by 5-10″ tire with built in shock accumulator system
Colors:	Delivered in epoxy primer final paint on request. Trim black (Covers and cleats) 3M No skid abrasive coating full length
Weight:	Complete package for Moose or Cessna 180/185/182 will be under 650 lbs
Gear Movement:	Electro/ Hydraulic 12 volt (in float or aircraft) Visual notification system standard and audio gear warning available
Composite construction: Using E glass, Kevlar and carbon fiber over a foam core and utilizing “Infusion” as the primary process gives the product outstanding strength and durability. Aerodynamic efficiency and strength to weight ratio is significantly superior when compared to metal construction. The composite structure will require less maintenance in its lifetime and will weigh 8- 12% less than metal floats depending on buoyancy size.
Displacement	Amphibious (100%) 3480 lbs (80%)3867 lbs Straight (100%) 3654 lbs (80%)4060 lbs
*maximum aircraft gross weight with 80% reserve buoyancy (2 floats) as per TSO-c27
CLAMAR FLOATS PHONE:833-423-5628 EMAIL:paul.richards@clamarfloats.com 74 Orion St. Brunswick, ME 04011 Established in 1990 Clamar Technologies Inc.

Model 2180 Float Specifications:
Length:		16 ft. 4 in.
Width:		Tail 20″ Mid 29″ Nose 19.5″
Height:		23.5″ Highest point
Compartments:		6 All accessible with 6″ spin off covers or baggage doors
Main baggage compartment:		11″ X 21.75″ opening (17 CUBIC FEET ON C OF G)
Wheels:		Amphib. Mains 500 by 5 with 15″ tires, chromed bearings, and modified grease fittings for extended wear.
Azusalite Nose:		4.00 By 5 Full 10 Inch Wheel 4.5 inches wide
Colors:		Delivered in epoxy primer final paint on request. Trim black (Covers and cleats) No skid abrasive coating full length including people step.
Sample Calculations for P-18 Replica (Wide Body)
	Amphibious floats (Includes Rigging)
EMPTY WEIGHT	1150
MAIN GEAR	–79
TAIL WHEEL	–13
AMPHIB FLOATS Includes Rigging/Paint	356
GROSS WEIGHT	2200
USEFUL LOAD	717
EXCHANGE WEIGHT	258

Prices

Due to so many variables, (US dollar, Canadian dollar etc…) prices are upon request.

PRICE INCLUDES:

Fully assembled floats, including water rudders, cables, pulleys
Deck fittings, steps (both sides)
Spreader bars and vertical strut material
Rudder retraction cables, and specific attachment hardware needed for installation on the P18 Cub type replica aircraft, Glastar, Bearhawk, Moose, etc.
Also includes paddle bracket, and grease kit for amphibs
Finish paint on request
Special Paint on request
Crating $800

SAM_0310